Disassembling And Assembling The Motor Cover - Dürkopp Adler D869 e-con Service Instructions Manual

Working basis
2. Tighten the screws (2).
3.4.5

Disassembling and assembling the motor cover

Fig. 10: Disassembling and assembling the motor cover
①
② ③
(1) - Screws (3) - Lever
(2) - Motor cover
Important
When disassembling and assembling the motor cover, be sure not to pull
off any cables.
Disassembling the motor cover
To disassemble the motor cover:
1. Set the lever (3) vertical.
2. Loosen the screws (1).
3. Disassemble the motor cover (2).
Assembling the motor cover
To assemble the motor cover:
1. Set the lever (3) vertical.
2. Assemble the motor cover (2).
3. Tighten the screws (1).
22 Service Instructions D869 e-con - 00.0 - 09/2023