Dürkopp Adler D869 e-con Service Instructions Manual page 67

Sewing feet
Fig. 51: Adjusting the sewing foot lifting gear (4)
(8) - Screw
11. Turn the spring clockwise using the screw (8) until the gear (6) is at
 The plates of the lifting gear are parallel to one another.
Fig. 52: Adjusting the sewing foot lifting gear (5)
(4)
12. Tension the spring clockwise by 45° using screw (8) before fixing it in
13. Use your hand to test if the gear (6) is pushed to the 0 position by
14. Assemble the PCB (3) with cover (1) again.
15. Attach the plug at the circuit board (3).
Service Instructions D869 e-con - 00.0 - 09/2023
⑧
the 0 position.
- Screw
place using screw (4).
the spring.
④
(8) - Screw
⑧
65