Basic Settings Of The Machine - Dürkopp Adler D869 e-con Service Instructions Manual

Appendix
23.3
If you want to perform a complete recalibration of the machine, use the values
below for reference:
Setting
mechanical
Stitch regulator gear
Sewing foot lift
Sewing foot pressure
Looping stroke
Needle guard
Feed dog height
Feed dog position
Compensating feet
Needle thread regulator
Travel of thread tensioning spring
Tension of thread tensioning spring
Hook thread tension*
Needle thread pretension (with the main tension
open)
electronic
Stitch length V/O/R
Needle thread tension
Material thickness detection
* Calibration at the factory depending on the equipment with Serafil white 40 Nm, 30 Nm
1
2
3
Required tools:
• Locking peg (included in the scope of delivery, part number 0867 104950)
• Spring balance 600 gr. (part number 0APP 001503)
Service Instructions D869 e-con - 00.0 - 09/2023

Basic settings of the machine

1, 3
2, 3
or 20 Nm
Calibration at the factory always with Serafil black 30 Nm
Pretension must always be adjusted mechanically first!
measured without needle thread regulator and thread tensioning spring
Preset value
 p. 52
 p. 67
 p. 67
2 mm
 p. 57
0.6 × 0.7 mm
 p. 62
 p. 70
 p. 72
90 gr.
 p. 74
100 gr.
60 gr.
 p. 127
1
200 gr.
 p. 139
233