Dürkopp Adler D869 e-con Service Instructions Manual page 26

Assembling the toothed belt cover
To assemble the toothed belt cover:
Fig. 12: Toothed belt cover (2)
(5) - Plates
1. Place the toothed belt cover (2); start by placing the plates (5) first.
2. Tighten the screws (1).
Fig. 13: Toothed belt cover (3)
(6) - Centering pin
3. Place the handwheel (3), making sure that the centering pin (6) is posi-
4. Tighten the screws (4).
24
⑥
tioned correctly (otherwise, referencing by the hall sensor will not work
properly).
⑤
Service Instructions D869 e-con - 00.0 - 09/2023
Working basis