Disassembling And Assembling The Feed Dog - Dürkopp Adler D869 e-con Service Instructions Manual

2. Tighten the screws (3).
3. Assemble needles, walking foot (1) and presser foot (4).
3.5
On 1-needle machines:
Fig. 21: Disassembling and assembling the feed dog (1)
(1) - Walking foot
(2) - Presser foot
(3) - Free arm cover
Proper setting
The feed dog does not touch the throat plate with the maximum permissi-
ble stitch length.
Disassembling the feed dog
To disassemble the feed dog on 1-needle machines:
1. Execute the service routine Feed dog > Assemble ( p. 14).
2. Press Next.
 The software is used to define the necessary presettings on
3. Press the Service Stop button.
Important
The maximum permissible stitch length can be set in the service routine.
4. Disassemble walking foot (1), presser foot (2) and needle.
30

Disassembling and assembling the feed dog

①
②
the machine.
(4) - Screw
(5) - Feed dog
Service Instructions D869 e-con - 00.0 - 09/2023
Working basis
⑤
④
③