Working basis
On 2-needle machines:
Fig. 19: Disassembling and assembling the throat plate (3)
(1) - Walking foot
(2) - Throat plate
To disassemble the throat plate on 2-needle machines:
1. Press the Service Stop button.
2. Lift the sewing feet.
3. Disassemble needles, walking foot (1) and presser foot (4).
4. Loosen the screws (3).
5. Disassemble the throat plate (2).
To assemble the throat plate on 2-needle machines:
1. Place the throat plate (2) in accordance with the sewing direction.
Fig. 20: Disassembling and assembling the throat plate (4)
(1)
Service Instructions D869 e-con - 00.0 - 09/2023
①
②
Make sure that the nose (5) is positioned in the slot on both sides.
①
- Throat plate
④
③
(3) - Screws
(4) - Presser foot
⑤
(5) - Nose
29