Setting The Needle Thread Tension Sensor Parameters; Setting The Holding Force Parameters - Dürkopp Adler D869 e-con Service Instructions Manual

17.4.11 Setting the Needle thread tension sensor parameters

Icon

17.4.12 Setting the Holding Force parameters

Various settings can be made for the holding force of the motor.
The possibilities are explained in more detail in the table.
Icon
132
Menu items
On/Off
Thread tension sensor mode
Menu items
Mode
Max. Current
Holding current of the motor
Response
Response time for the continuous current
Service Instructions D869 e-con - 00.0 - 09/2023
Programming
Value range
• Value range
On/Off
• Value range
On/Off
Value range
Holding Position
• Value range
On/Off/Holding
Position
Holding Position: the
sewing motor is always
regulated to this posi-
tion. It is not possible to
change the position by
using the handwheel or
setting additional
parameters.
Only visible for Mode On
• Value range
00 - 50
Only visible for Mode On
• Value range
000 - 100