Table of Contents
Advertisement
Adjusting the safety release clutch
14 Adjusting the safety release clutch
The safety release clutch disengages in the event of the thread jamming
and thus prevents the hook from being misadjusted or damaged.
14.1
Proper setting
Fig. 72: Engaging the safety release clutch (1)
(1) - Threaded pin
At a handwheel position of approx. 200°, the first threaded pin (1) in
the direction of rotation is positioned at a right angle to the shaft.
To engage the safety release clutch:
1. Tilt the machine head ( p. 18).
2. Lock the machine in place ( p. 34).
3. Hold the handwheel in place with one hand.
Service Instructions D869 e-con - 00.0 - 09/2023
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you adjust the safety
release clutch.
Engaging the safety release clutch
①
87
Advertisement
Table of Contents
