Dürkopp Adler D869 e-con Service Instructions Manual page 70

To adjust the sewing foot pressure and the sewing foot lift:
1. Switch off the machine.
2. Disassemble the toothed belt cover ( p. 23).
3. Disassemble the motor cover ( p. 22).
4. Insert the locking peg (∅ 5 mm) (1).
Fig. 56: Adjusting the sewing foot pressure and sewing foot lift (2)
(2) - Throat plate
(3) - Presser foot
5. Presser foot (3) and walking foot (4) must rest on the throat plate (2):
Fig. 57: Adjusting the sewing foot pressure and sewing foot lift (3)
(5) - Lever
(6) - Screw
6. Loosen the screw (6).
7. Turn the curve (7) until the roller (8) is seated in the recess of
8. To align the lever (5) sideways: The roller (8) must be flush with
9. Tighten the screw (6).
68
②
if necessary, align using the handwheel.
⑤
⑥
the curve (7).
the curve (7).
(4) - Walking foot
⑦ ⑧
(7) - Curve
(8) - Roller
Service Instructions D869 e-con - 00.0 - 09/2023
Sewing feet
④
③
⑦