HOLDEN XC Series Owner's Handbook Manual page 91

4. Chock the wheel diagonally opposite
the flat tyre by placing wedge blocks,
any available blocks of wood or rocks
behind and in front of it.
5. Remove the wheel trim, if fitted.
STEEL WHEELS
Remove the wheel trim using the tool provided in the vehicle tool kit.
ALLOY WHEELS
If centre caps are fitted, use a
screwdriver (provided in the tool kit) to
remove the cap using the following
method.
Position the screwdriver in the recess at
the side of the hub cap and lever the cap
partly off. Place the screwdriver in the
opposite bolt hole and lever the cap fully
off the wheel.
Use the screwdriver to remove the plastic
wheel bolt caps (if fitted).
ANTI-THEFT WHEELS
Use the key provided in the tool kit to remove the centre cap.
6. Loosen (but do not remove) the wheel
bolts with wheel bolt wrench.
FLAT TYRE cont.
Chapter 6
EMERGENCIES
6-7