HOLDEN XC Series Owner's Handbook Manual page 109

4. Press the two bulb holder retaining tabs
together and remove the bulb holder.
Bulb sequence, from top to bottom:
Brake / tail light (two filaments)
Turn signal light (amber globe)
Reverse light
Fog light
5. Replace the faulty bulb and install the
bulb holder into the lens assembly.
6. Align the rear light assembly locating
lugs with the body holes and install the
assembly.
7. Install the large white retaining screws
then the harness connector. Ensure
that all lights operate correctly.
8. Fit the dress cover.
BULB REPLACEMENT cont.
Chapter 6
6-25
EMERGENCIES