Chapter 6
6-28
EMERGENCIES
Combo luggage compartment lights
Before removal, close the rear doors or
make sure that the contact switch is kept
pressed so that the lights are not live.
1. Insert a flat-bladed screwdriver into the
slot at the top of the lens and carefully
prise the rear compartment light out of
the trim.
2. Disconnect the wiring harness
connector.
3. Remove the bulb by pressing against
the top of the long contact, as illustrated.
4. Install a new bulb and then install the
wiring harness connector.
5. Align and install the light ensuring that it
is fully housed into the body.
BULB REPLACEMENT cont.