HOLDEN XC Series Owner's Handbook Manual page 71

Hide thumbs Also See for XC Series:
Table of Contents

Advertisement

MANUAL TRANSMISSION (if fitted) cont.
Operating notes
When shifting from one gear to another, be sure to press the clutch pedal fully to
avoid clashing and possible chipping of the transmission gears.
Never attempt to engage reverse gear until the vehicle has completely stopped. A
slight pause (a few seconds) between pressing the clutch pedal and moving the gear
lever into reverse gear is desirable. This allows the rotating components to stop and
helps avoid gear clashing. Whenever reverse gear is selected with the ignition on,
the reverse lights illuminate.
Shift the gear lever with a moderate effort to allow time for the transmission
synchronisers to work properly.
Do not drive with your foot resting on the clutch pedal. This will cause substantial
clutch wear.
When stopped on an incline, do not hold the vehicle by slipping the clutch. Use the
park brake or brake pedal.
To maintain safe speeds on a steep downgrade and to reduce brake wear and
overheating, shift into a lower gear before starting the descent.
Do not over-speed the engine when shifting down to the next lowest gear.
Chapter 4
4-5
DRIVING

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc barina 2003Xc combo 2003

Table of Contents