Table of Contents
Advertisement
Chapter 1
1-22
DASHBOARD
Cruise control maintains the speed of your
vehicle without you having your foot on the
accelerator pedal and works at speeds
over 30 km/h.
The cruise control lever is on the left side
of the steering column. The lever has two
switches.
The 'O' (off) switch is the lower of the two
switches and is activated by pushing in the
direction of the steering column.
The upper switch is used to adjust speed.
It is a two part switch, marked 'I' and 'R'.
The 'I' (increase) part of the switch has a
raised dimple = increase in speed.
The 'R' (reduce) part of the switch has a recessed dimple = decrease in speed.
Switching on
•
Press the accelerator pedal until the vehicle is travelling at the desired speed, (above
30 km/h).
•
Tap the 'I' button.
•
Release the accelerator pedal, as the cruise control is now maintaining speed.
TO INCREASE SPEED WITH CRUISE CONTROL ON:
Hold down button 'I' or tap it repeatedly: the speed is increased continuously or in steps
of 2 km/h without using the accelerator pedal.
When button 'I' is released the selected speed is stored and maintained.
TO DECREASE SPEED WITH CRUISE CONTROL ON:
Hold down button 'R' or tap it repeatedly: the speed is reduced continuously or in steps
of 2 km/h.
When button 'R' is released the selected speed is stored and maintained.
CRUISE CONTROL (if fitted)
Advertisement
Table of Contents
