HOLDEN XC Series Owner's Handbook Manual page 50

Chapter 3
3-6
KNOW YOUR CAR
LUGGAGE COMPARTMENT ENLARGEMENT
BARINA
Place the tongues of the seat belts into the
holders on the side trim (if fitted).
Remove the rear seat from the floor by
grasping at the front edge in the areas
indicated by the arrows and pulling it
upwards. When the front of the rear seat is
clear of the floor, pull it forwards.
Swing the rear seat forwards. Fold the rear
seat backrests forward as described on
the previous page.
Repositioning the rear seats
Reposition the backrests as described on
the previous page.
Fold the rear seat down and push it into
place between the backrests and the floor.
Press firmly on the front edge of the rear
seat in the areas indicated by the arrows to
lock the seat into place.
Ensure that the rear seat is firmly attached
to the floor by grasping it and attempting to
move it.