Chapter 6
6-20
EMERGENCIES
Headlights, high beam
1. Open the bonnet and engage the
support rod.
2. Rotate the headlight cap anticlockwise
and remove it from the headlight
housing.
3. Remove the bulb connector from the
bulb.
4. Disengage the spring-wire clip from its
retaining lugs by pressing the top loop
as illustrated and moving it sideways.
The spring-wire clip will now swivel
downwards.
5. Remove the bulb from reflector housing.
6. Install the new bulb without touching the
glass and with the three bulb locating
lugs correctly positioned in the reflector
recesses.
7. Engage the spring-wire clip in the
reflector retaining lugs.
8. Install the cap into the headlight housing
and rotate it clockwise.
BULB REPLACEMENT cont.