Table of Contents
Advertisement
Chapter 8
8-4
SPECIFICATIONS
1
2
3
1. Emission label (Barina)
This label shows the relevant tune-up information required to maintain minimum
exhaust emissions. It is located on the underside of the bonnet (driver's side).
2. Safety compliance plate
The compliance plate shows the vehicle approval number, category code, make,
model and seating capacity. It also displays the ISOVIN number, which should be
used when selecting spare parts. This plate is located on the engine bay partition,
driver's side (Barina) or on the driver's side suspension tower (Combo).
3. Vehicle identification number
(ISOVIN) plate
The ISOVIN. plate is located on the driver's
side suspension tower, in the engine
compartment.
4. A/C system plate (if fitted)
This label shows air conditioner system
specifications.
5. Warning label
This label serves as a reminder of some hazards that can exist in the engine area.
6. Holden identification plate (if fitted)
The Holden number on the Holden identification plate is used for warranty identification
and Roadside Assistance identification. This plate is located on the passenger side
of the radiator support panel.
IDENTIFICATION LABELS cont.
5
4
6
Advertisement
Table of Contents
