11.1.3.1.3 Signaling; Figure 60: Structure Of The Handshake Byte; Table 68: Signaling - WAGO 750-632 Manual

110 Appendix

11.1.3.1.3 Signaling

In signal mode, the handshake byte appears as follows:

Figure 60: Structure of the Handshake Byte

Table 68: Signaling

Value
0x00
0x32
0x33
(other)
Manual
Version 1.3.1, valid from FW/HW-Version 01/01
Explanation Description
INVALID SIGNAL State of the process image with no effect by
Mailbox 2.0.
RESET SIGNAL Shows that the local Mailbox is in the process of
restarting.
ERROR SIGNAL Shows that the local Mailbox is in the fault
condition.
- Other values are not considered as signals and are
processed separately in the Status or Control
nibble.
WAGO I/O System 750/753
750-632 Proportional Valve Module