Table 45: Status Byte S0 - WAGO 750-632 Manual

WAGO I/O System 750/753
750-632 Proportional Valve Module

Table 45: Status Byte S0

Bit 7
REG=0
REG=1
Key
REG
REGCOM_UPSTREAM
ERR*
ERR_CH2 **
ERR_CH1 **
ERR_MOD **
* The bit remains set until the cause of the error is remedied and the error is acknowledged.
Acknowledgement
** The bit remains set until the cause of the error is remedied and the error is acknowledged.
Acknowledgement
V2_Control1.PWR_EN.
The configuration of the control and status bytes (C1 or C2 and S1 or S2) is
identical for each channel.
Status Byte S0
Bit 6 Bit 5
ERR 0
0: Register communication disabled
1: Register communication enabled
Internal parameter
0: No errors present.
1: The I/O module is in error condition.
The source of error is displayed in bits 0 ... 2.
The error code was transferred via the mailbox.
0: Channel 2 has no errors
1: Channel 2 has one or more errors.
0: Channel 1 has no errors.
1: Channel 1 has one or more errors
0: There are no errors.
1: There are one or more errors.
takes place at the positive edge of bits C0.PWR_EN or C1.PWR_EN.
takes place at the positive edge of bits V1_Control1.PWR_EN or
Bit 4 Bit 3
0 0 ERR_CH2 ERR_CH1
REGCOM_UPSTREAM
Version 1.3.1, valid from FW/HW-Version 01/01
Process Image
Bit 2 Bit 1
ERR_MO
Manual
67
Bit 0
D