Navigation Area; Application Area - WAGO 750-632 Manual

WAGO I/O System 750/753
750-632 Proportional Valve Module
9.1.1.2

Navigation Area

In the navigation area, there are eight different buttons that can be used to
configure the I/O module:
• "Operating Mode" menu item
• "Module Parameters" menu item
• "Digital Inputs" menu item
• "Ramp Settings" menu items
• "Dither Generator" menu items
• "Valve Adjustment" menu item
• "Linearization" menu item
• "Position" menu item
9.1.1.3

Application Area

Depending on the selection made in the navigation bar, the individual settings
can be executed here.
Observe function descriptions!
A detailed explanation of the subsequently listed functions can be found in the
"Function Description" section!
Version 1.3.1, valid from FW/HW-Version 01/01
Commissioning 87
Manual