Parameter, Reference; Channel-Independent Parameters; Table 79: Parameter, Reference, List Of Tables; Table 80: Parameters, Table 30 (Valve Configuration) - WAGO 750-632 Manual

122 Appendix
11.4

Parameter, Reference

All I/O module parameters are listed in the following as an overview. The
parameters are saved in the form of registers having a size of two bytes (one
word) each. One or more registers can be consolidated as tables.

Table 79: Parameter, Reference, List of Tables

Table
30
31
33, 34
38
50, 51
52, 53
54, 55
56, 57
58, 59
60, 61
68, 69
62, 63
72, 73
11.4.1

Channel-Independent Parameters

11.4.1.1 Table 30 (Valve Configuration)

Table 80: Parameters, Table 30 (Valve Configuration)

Register
0
Manual
Version 1.3.1, valid from FW/HW-Version 01/01
Acces Parameter
s
RO Valve configuration
RO Status
RW DI1, DI2
RO Process variables
RW Process data handling, Valve 1, Valve 2
RW Output stage, Valve 1, Valve 2
RO Status, Valve 1, Valve 2
RW Ramp generators, Valve 1, Valve 2
RW Characteristic curve adjustment, Valve 1, Valve 2
RW Valve adjustment, Valve 1, Valve 2
RW Current controller
RW Dither, Valve 1, Valve 2
RO Process variables, Valve 1, Valve 2
Name, Bits
Type Explanation
ST_VALVE_ 0
CONFIG, UINT16
WAGO I/O System 750/753
750-632 Proportional Valve Module
Value/Range Description
(Default)
0 Operating with one valve
1 Operating with two valves