Figure 27: Positive Overlap; Table 38: Types Of Overlap - WAGO 750-632 Manual

60 Function Description
• Positive overlap: The high overlap ensures the lowest possible leakage in
the zero position. This type of overlap is used most commonly in
proportional valves.

Figure 27: Positive Overlap

Table 38: Types of overlap

Negative Overlap
Compensation using
parameters
#TRIGGER > 0
(Response threshold)
Manual
Version 1.3.1, valid from FW/HW-Version 01/01
750-632 Proportional Valve Module
Zero Overlap
No compensation used
WAGO I/O System 750/753
Positive Overlap
Compensation using
parameters
#MIN
(Inrush current)