Hold; Figure 13: "Hold" Function; Table 26: "Hold" Function - WAGO 750-632 Manual

42 Function Description
5.3.4

"HOLD"

During a ramp, the current level can be maintained using the "HOLD" function.

Figure 13: "HOLD" Function

Table 26: "HOLD" Function

No. Event
- SPL_EN is set to "1".
Setpoint value is
increased.
1 Set SPL_EN to "0"
Set SPL_EN to "1"
2
Manual
Version 1.3.1, valid from FW/HW-Version 01/01
WAGO I/O System 750/753
750-632 Proportional Valve Module
Description/Behavior
Ramp starts. Present current level is
increased.
Ramp stops. Present current level is
maintained.
Ramp restarts. Present current level is
increased.