Connecting To A Console Port - Panasonic PN261693D Manual

1.1. Connecting to a Console Port

Connect the terminal, where a terminal emulator operates, to a console port of
the RJ 45 model of this device. The terminal includes the asynchronous terminal
produced by DEC and the hyper terminal (which is included in the Windows XP or
earlier version). Both the asynchronous terminal and the terminal emulator above
are compatible with VT100. The communication condition of asynchronous termi-
nal is configured, as follows.
・ Communication system: RS-232C (Compatible with ITU-TS V.24)
・ Emulation mode: VT100
・ Communication speed: 9,600bps
・ Data-length: 8 bits
・ Stop bits: 1 bit
・ Parity control: Nothing
・ Flow control: Nothing
・ Communication connector: RJ45
7