Panasonic PN261693D Manual page 35

Mode Displays the configuration status of full or half duplex, and the communication
speed. Every mode is set to "Auto" for the factory default settings.
Auto
100-FDx(100F)
100-HDx(100H)
10-FDx(10F)
10-HDx(10H)
Power-Saving Displays the status of the power-saving mode. Every power saving is configured
to "Half" for the factory default settings.
Half
Full
Disabled
EEE(802.3az) Displays the status of EEE(Energy Efficient Ethernet). "Disabled" is configured to
a factory default settings.
Enabled
Disabled
The following describes how to use several commands on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
S Configures the power-saving mode of each port.
1. Press S, and then the appearance of the command prompt becomes "Select port
number to be changed>". After that, enter the port-number to be changed.
2. Press 0 when changing all the ports simultaneously.
3. The appearance of the command prompt becomes "Enter Power Saving mode for port
(F/H/D)>". Press E to enable, and D to disable it.
4.
Press H to configure the power saving mode that prioritizes the connectivity with other
devices. After completing the configuration, the display on the upper side is updated.
E Configures EEE of each port.
1. Press E, and then the appearance of the command prompt becomes "Select port-
number to be changed>". After that, enter the port-number to be changed. Press 0 to
change all the ports, simultaneously.
2. The appearance of the command prompt becomes "Enable, Disable for Energy Efficient
Ethernet (EEE 802.3az). Then press E to enable and D to disable it.
Q Returns to the top menu.
Auto negotiation mode
100Mbps full duplex
100MBps half duplex
10Mbps full duplex
10MBps half duplex
Displays that the status of the power-saving mode is enabled
(half).
Displays that the status of the power-saving mode is enabled
(Full).
Displays that the status of the power-saving mode is disabled.
Displays the status of EEE (Energy Efficient Ethernet).
Displays that the EEE status is disabled.
35