Table of Contents
Advertisement
The following describes how to use several commands on this screen.
H
Configures to access SSH.
Press H (command), and then the appearance of the command prompt becomes "Enable or
Disable SSH server (E/D)>". Press E to be accessible, and D to be inaccessible.
O
Configures time needed until the connection is automatically disconnected; if nothing is
entered when connecting with the SSH.
Press O, and then the appearance of the command prompt becomes "Enter SSH UI idle
timeout>". Configure the numerical value whose range is from 1 to 1,349 (minutes).
A
Configures response time to the SSH authentication.
Press A, and then the appearance of the command prompt becomes "Enter SSH authentica-
tion idle timeout>". Configure the numerical value whose range is from 30 to 600 (seconds),
and then "Enter SSH authentication" is displayed.
R
Configures the number of retransmissions regarding the SSH authentication.
Press R, and then the appearance of the command prompt becomes "Enter SSH
authentication retries time>". After that, configure the numerical value whose range is from
1 to 32 (times).
Q
Returns to the top menu.
47
Advertisement
Table of Contents
