Panasonic PN261693D Manual page 102

R Deletes an MST instance ID.
Press R, and then the appearance of the command prompt becomes "Enter MSTP instance
ID>". Enter the MST instance ID to be deleted.
M Configures the MST instance.
1. Press M, and then the appearance of the command prompt becomes "Enter MSTP
instance ID>", enter the instance ID of target MST.
2. The appearance of the screen becomes "MST Instance Configuration", you can imple-
ment the advanced settings on the MST instance. Regarding the configuration method,
see next section (4.4.6).
C Configures per port of the MST instance.
1. Press C, and then the appearance of the command prompt becomes "Enter MSTP
instance ID>". Enter an instance ID of the target MST.
2. The appearance of the screen becomes "MST Instance Port Configuration", and then you
can implement the configuration per port of MST instance. Regarding the configuration
method, see next section (4.4.7).
I Configures the configuration information on the MST instance.
1. Press I, and then the appearance of the command prompt becomes "Enter MSTP
instance ID>". After that, enter the instance ID of target MST.
2. The appearance of the screen becomes "MST Instance Topology Information", and
then the configuration information on MST-instance can be configured.
3. Regarding this configuration method, see next section (4.4.8).
Q Returns to the top menu.
102