Screen Description
Power Budget
Displays the power-supply, which can be supplied by this device.
Power
Displays the value of power-supply that this device supplies.
Consumption
Power Usage
Displays the threshold value of power-supply to send traps.
Threshold for
Displays that the factory default settings is 50%.
Sending Trap
Power
Displays the method of power-supply when the supply exceeds the Power Bud-
Management
get. The factory default settings is "Deny next port connection, regardless of
Method
priority".
Deny next port connection,
regardless of priority
Low priority port will be
shut down
The following describes how to use several commands on this screen.
U
Sets the threshold value to send traps.
Press U (command), and then the appearance of the command prompt becomes "Enter
power usage threshold>". Enter the threshold value to send traps.
M Configures the method of managing the power-supply.
Press M, and then the appearance of the command prompt becomes "Enter the power
management method>". Select the method of managing, and then enter it. Shut down
those with a low priority, and then enter zero (0) to supply for the newly connected ones.
Press 1 if you do not supply for the physical object (or hardware), which is connected to the
next hardware, regardless of the priority value. The power-supply for the port with the
higher port-number becomes stopped, in the case of the same priority.
Q
Returns to the top menu.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: Connect the power receiver of PoE (compatible with IEEE802.3at), which con-
sumes more than 15.4W, on the condition that the amount of power-supply is lower
than 354.5W. If the amount exceeds 370W, the power-supply always becomes
stopped for the lower-priority port regardless of the configuration of the power
management method. The power-supply for the port with the higher port-number
becomes stopped in the case of the same priority.
-------------------------------------------------------------------------------------------------------------------------------------------
Stops supplying (or feeding) power for the port
connected right before that power budget
exceeds.
Stops supplying power for the port of the lowerst
priority. If the priority is the same, the power-
supply for the port with the higher port-number
becomes stopped.
135