Panasonic PN261693D Manual page 15

Screen Description
System up for Displays the total time, which is needed since the activation of your device.
Boot / Runtime Displays a firmware version of your device. This indicates the version; the left side
Code Version is Boot Code, and the right side is Runtime Code. (The firmware upgrade
described in section 6.1 becomes the upgrade of Runtime Code.)
Serial Number Displays the serial number of your device.
Hardware Displays hardware information.
Information
Version
CPU Utilization
DRAM / Flash
Size
DRAM User
Area Size
System Fan
Status
System
Temperature
Administration Items displayed on this part are configured by CLI.
Information
Switch Name
Switch Location
Switch Contact
System Address Items displayed on this part are set by "System IP Configuration" of section 3.1.
Information
MAC address
IP Address
Subnet Mask
Default
Gateway
DHCP Mode
Displays the hardware version.
Displays the CPU utilization.
Displays the DRAM implemented and the FLASH-capacity.
Displays the capacity of a whole memory available and the
empty-memory capacity.
Displays an operation condition (or status) of the fan
implemented. "Good" is displayed during the normal
operation, and "Fail" is displayed during the abnormality
and stoppage.
Displays the temperature of the internal equipment. The
temperature sensor measures CPU and System.
Displays the name of your device.
Displays the installation site of your device configured. The
factory default settings is nothing.
Displays the contact information configured. The factory
default settings is nothing.
Displays a MAC address of your device. As this value is unique
per individual device, it is not changeable.
Displays the IP address, which is set to your device. Nothing is
configured on the factory default settings,
"0.0.0.0" is displayed. See section 3.1 for the configuration.
Displays the subnet mask, which is configured to your device.
Nothing is configured for the factory default settings, and
thus "0.0.0.0" is displayed. See section 3.1 for the
configuration.
Displays the IP address of a router, which can become a
default gateway. Nothing is configured for the factory default
settings, and thus "0.0.0.0" is displayed. See section 3.1 for
the configuration.
Displays the configuration if a DHCP is used to obtain an IP
address. See section 3.1.
15
and thus