Panasonic PN261693D Manual page 43

A Configures a NAS ID.
Press A, and then the appearance of the command prompt becomes "Enter NAS ID>".
After that, enter the NAS ID within 16 characters (half-size).
I Configures an IP address of a RADIUS server.
1. Press M, and then the appearance of the command prompt becomes "Enter RADIUS
server index>". After that, enter the target index.
2. The appearance of the command prompt becomes "Enter IP Address for radius server>".
Then enter the IP address.
C Configures the Shared Secret of the RADIUS server.
Press M, and then the appearance of the command prompt becomes "Enter RADIUS server
index>". After that, enter the target Index.
Press C, and then the appearance of the command prompt becomes "Enter secret string for
server>". After that, enter the Shared Secret within 32 characters (half size).
R Set the waiting time needed until the RADIUS server responds to an authentication require-
ment.
Press M, and then the appearance of the command prompt becomes "Enter RADIUS server
index>". After that, enter the target index.
Press R, and then the appearance of the command prompt becomes "Enter response time>".
After that, enter the value in the range from 1 to 255 (seconds).
M Configures the maximum number of times for retransmitting an authentication requirement.
1. Press M, and then the appearance of the command prompt becomes "Enter RADIUS
server index>". After that, enter the target index.
2. The appearance of the command prompt becomes "Enter maximum retransmission>".
Then enter the integer in the range from 1 to 20.
Q Returns to the top menu.
43