Table of Contents
Advertisement
The following describes how to use several commands on this screen.
N
Displays the next page.
Press N (command) to display the next page.
P
Displays the previous page.
Press P to display the previous page.
T
Configures the aging timeout on an ARP table.
Press T (command), and then the appearance of the command prompt becomes "Enter
ARP age timeout value >". Then configure it in the range from 30 to 65,535 (seconds) for
the aging timeout of ARP table.
A
Adds and modifies (or revise) an entry of ARP table.
7. Press A (command). As the appearance of the command prompt becomes changed to
"Enter IP address >", enter an IP address.
8. Press **:**:**:**:**:**" for MAC address as the appearance of the command prompt
becomes changed to "Enter Hardware address >".
D
Deletes an entry of ARP table.
Press D (command). Enter an IP address as the appearance of the command prompt
becomes changed to "Enter IP address >".
Q
Returns to the top menu.
62
Advertisement
Table of Contents
