Panasonic PN261693D Manual page 105

Role Displays the port role on a spanning tree.
Designated
Root
Alternate
Backup
Disabled
N/A
Pri. Displays the priority of each port in the Switch.
The higher a numerical value is, the higher a priority is.
Path Cost Displays the cost of each port.
STP Status Displays the status to enable or disable a spanning tree of each port.
Enabled
Disabled
N/A
The following describes how to use several commands on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
I Configures the priority of ports in your switch.
1. Press I, and then the appearance of the command prompt becomes "Select port-number
to be changed>". Enter the target port-number.
2. As the appearance of the command prompt becomes "Enter priority >", enter the multi-
ple of 16 in the range from 0 to 240.
C Configures the cost of each port.
1. Press C, and then the appearance of the command prompt becomes "Select port-
number to be changed>". Enter the target port-number.
2. As the appearance of the command prompt becomes "Enter path cost >", enter the num-
ber in the range from 1 to 200,000,000.
S Configures to enable or disable a spanning tree of each port.
1. Press S, and then the appearance of the command prompt becomes "Select port-number
to be changed>". Enter the target port-number.
2. As the appearance of the command prompt becomes "Enable or Disable STP >", press E
to use the spanning tree, and D otherwise.
Q Returns to the top menu.
In operation as a designated port.
In operation as a route port.
In operation as an alternate port.
In operation as a backup port.
STP is not in operation.
Indicates the status that a port is not associated with MST instance
selected.
A spanning tree is enabled.
A spanning tree is disabled.
Indicates a status where no ports are associated with the MST
instance selected.
105