Panasonic PN261693D Manual page 31

Screen Description
Port Displays the port-number.
Trunk Displays the configuration condition of trunking by the group number.
Type Indicates the type of ports.
100TX
1000T
10G-T
10G-R
Admin Displays the condition of a current port. All of the factory default settings are set to
"Enabled".
Enabled
Disabled
Link Displays the condition of a current link.
Up
Down
Mode Displays the communication speed, and the configuration condition of full/half-
duplex. All of the factory default settings are set to "Auto".
Auto
100-FDx(100F)
100-HDx(100H)
10-FDx(10F)
10-HDx(10H)
Flow Ctrl Displays the configuration condition (or requirement) of the flow control. All of the
factory default settings are set to "Disabled".
Enabled
Disabled
Auto-MDI Displays the configuration condition of the function of Auto MDI/MDI-X. Up-link port
(combo-port) is set to "Enabled", and down-link port (non combo-port) is set to
"Disabled".
Enabled
Disabled
Indicates 10/100BASE-TX.
Indicates 10/100/1000BASE-T.
Indicates 100/1000/10GBASE-T.
Indicates SFP+ ports.
Ports can be used.
Ports cannot be used.
Indicates that a link is normally established.
Indicates that a link is not established.
Auto-negotiation mode
100Mbps full duplex
100Mbps half duplex
10Mbps full duplex
10Mbps half duplex
Indicates that a function of the flow control is enabled.
Indicates that the function of the flow control is disabled.
Indicates that a function of Auto MDI/MDI-X is enabled.
Indicates that the function of Auto MDI/MDI-X is disabled.
31