Panasonic PN261693D Manual page 167

N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
A Configures the PPS priority on the port specified (or designated).
Press A, and the appearance of the command prompt becomes "Enter port-number>".
Enter the port-number to be specified. After that, the appearance becomes "Enter PPS
Priority #>". Enter the priority to be set in the range from 0 to 255. The higher the value is,
the higher the priority will be. The factory default settings is 128.
Q Returns to the top menu.
167