Panasonic PN261693D Manual page 129

The following describes how to use several commands on this screen.
P Perform the PoE-port configuration.
Press P (command) to move to PoE Port Configuration Menu. See 4.8.2.
G Users can perform the PoE configuration.
Press G (command) to move to PoE Global Configuration Menu. See 4.8.3.
S Configures PoE scheduler.
Press S (command) to move to PoE Schedule Configuration Menu. See 4.9.1.
Q Returns to the top menu.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: This device can provide the power-supply with the terminal equipment, which
is compliant with IEEE802.3af or IEEE802.3af, up to 370W. 15.4W can be supplied to
each port maximally for the device (compatible with IEEE802.3af), and 30.0W to each
port maximally for the device (compatible with IEEE802.3at). Connect the equipment
needed so as the necessary power of the terminal equipment (for connecting each
other) does not exceed 370W. If the power exceeds it, then overload is indicated
during the status of section 4.8.2, and the power-supply cannot be operated, nor-
mally.
-------------------------------------------------------------------------------------------------------------------------------------------
129