Panasonic PN261693D Manual page 141

Action
Status
Next Execution Time
-------------------------------------------------------------------------------------------------------------------------------------------
Note: If the schedule configuration is the same time and date depending on a class, a
class schedule with the highest priority becomes executed.
[Priority: High] Date list > Monthly > Weekly > Daily [Priority: Low]
-------------------------------------------------------------------------------------------------------------------------------------------
The following describes how to use several commands on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
Ｇ Configures to enable or disable the PoE scheduler.
Press G, and then the appearance of the command prompt becomes "Enable or Disable
Global Status (E/D) >". Press E to enable and D to disable it.
Ｃ Creates a schedule.
Press C to move to Create Schedule Configuration Menu.
Ｄ Deletes a schedule.
Press D, and then the appearance of the command prompt becomes "Enter PoE Schedule
index >". Enter the index-number to be deleted.
Ｅ Configures to enable or disable per schedule.
Press E, and then the appearance of the command prompt becomes "Enter PoE Schedule
index >". Enter the index-number. After that, the appearance of the command prompt
becomes "Enable or Disable PoE Schedule index (E/D) >". Press E to enable and D to disable
it.
Ｌ Displays the port list, which is (in the progress of) being configured.
Press L to display Show Port List Information Menu.
Ｓ Displays the schedule, which is configured.
Press S, and then the appearance of the command prompt becomes "Enter PoE Schedule
index >". Enter the index-number. After that, Show Detailed Schedule Information Menu is
displayed on the screen.
Ｍ Edits a schedule.
Press M, and then the appearance of the command prompt becomes "Enter PoE Schedule
index >". Enter the index-number to display Modify Schedule Configuration Menu.
Ｂ Displays a schedule, which is configured per port.
Press B, and then the appearance of the command prompt becomes "Enter Port >". Enter
the port-number. After that, you can see Display Schedule By Port Menu on the screen.
Ｏ Configures in the order of displaying a schedule, which is configured.
Press O, and then the appearance of the command prompt becomes "Enter Sort method
>". Press 0 to display in the order of the index-number, and 1 to display in the order of the
execution time, for the next time.
Displays the number of port-lists, which are (in the progress of) being cre-
ated.
ON Set PoE to ON.
OFF Set PoE to OFF.
OFF/ON Set PoE to OFF before setting it to ON.
Displays the condition of the function of PoE schedule per port.
Enable Enables the function of PoE schedule per port.
Disable Disables the function of PoE schedule per port.
Displays the time and date when the next schedule is executed.
141