Table of Contents
Advertisement
PNxxxxxx Local Management System
Advanced Switch Configuration -> Multiple Spanning Tree Configuration
Global MSTP Status: Enabled
Global Protocol Version
Global MST Configuration Name
Global MST Revision Level
Global MST Config Digest
-------------------------------- <COMMAND> -----------------------------------
[E]nable/Disable Global MSTP
Set MSTP Protocol [V]ersion
Set MSTI Configuration [N]ame
Set MSTI [R]evision Level
CIST [C]onfiguration
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Global MSTP Status
Protocol Version
MST Configuration
Name
MST Revision Level
MST Config Digest
: STP-Compatible
:
: 0
: 00000000000000000000000000000000
Figure 4-13 D: STP Mode Time
Displays the operation condition of a spanning tree.
Enabled
A spanning tree is enabled.
Disabled
A spanning tree is disabled (factory default settings).
Displays a version of a spanning tree.
MSTP
Operates with a protocol of multiple spanning tree
(compatible with IEEE802.1s).
RSTP
Operates with a protocol of the rapid spanning tree,
which is compatible with IEEE802.1w (factory default
settings).
STP-Compatible
Operates with a spanning tree protocol (compatible
with IEEE802.1D).
Displays the name of MST region. This is not set for the factory default
settings.
Displays a revision of a MST region configuration. The factory default
settings is zero.
Displays a message digest of a MST configuration. (Displays the list
regarding the compatibility with the MST instance and the VLAN.）
CIST [B]asic Port Configuration
CIST [A]dvanced Port Configuration
MSTP Ins[t]ance Configuration
Designated Topology [I]nformation
Re[g]ional Topology Information
93
Advertisement
Table of Contents
