Port Monitoring Configuration - Panasonic PN261693D Manual

4.3. Port Monitoring Configuration

Press M (command) on the Advanced Switch Configuration menu, and then you
can see Mirror Consfiguration Menu as Figure 4-12. On this device, filtering occurs
when the communication is analyzed with a protocol analyzer. You can also
monitor packets (among other ports), which cannot be normally obtained. You
can implement the configuration of the port monitoring on this screen.
PNxxxxxx Local Management System
Mirror Configuration Menu -> Create Session Configuration Menu
Remote VLAN
------------- ---------------------------------------------------------------
----
Direction
------------- ---------------------------------------------------------------
Both
ACL List Name
-------------
----
-------------------------------- <COMMAND> -----------------------------------
Set Remote [V]LAN
Set [T]raffic Direction
Set AC[L] List Name
[A]pply
Command>
Enter the character in square brackets to select option
Screen Description
Remote VLAN
Monitoring Port
Be Monitored Port(s)
Direction
Status
2
Destination Port
1
CPU RX
------
No
Figure 4-12: Port Monitoring Configuration
Displays RSPAN VLAN of the destination session of RSPAN.
Displays the port-number of the destination of transferring data whose port
monitoring is conducted.
Displays the target port-number that needs the port monitoring.
Displays the communication direction of target packets that needs the port
monitoring.
Tx Monitors the packets for transmitting.
Rx Monitors the packets for receiving.
Both Monitors the packets for transmitting and receiving
(factory default settings).
Displays the monitoring condition.
Enabled A port monitoring is enabled.
Disabled A port monitoring is disabled (factory default settings).
Source Port(s)
Set [S]ource Ports to be Monitored
Set [D]estination Ports
Set [C]PU RX
[Q]uit to previous menu
89