Table of Contents
Advertisement
4.13.
Digital Diagnostic Monitoring
Press G (command) on the screen of Advanced Switch Configuration, and then you
can see Digital Diagnostic Monitoring Menu as Figure 4-59. You can configure a
function of checking the SFP module status on this screen.
PNxxxxxx Local Management System
Advanced Switch Configuration -> Digital Diagnostic Monitoring Menu
Limit Trap Status
SPF port-number
Vender Name
Vender Serial Number :
Status
High Alarm
High Warning 0.000
Low Alarm
Low Warning
-------------------------------- <COMMAND> -----------------------------------
[N]ext SFP Port
[P]revious SFP Port
Set Limit Trap [S]tatus
Command>
Enter the character in square brackets to select option
Screen Description
Limit Trap Status
SFP port-number
Tranceiver Type
Vender Name
Vender Product Number
Vender Serial Number
Rx Power (dBm)
Tx Power (dBm)
Temp (deg. C)
Voltage (V)
Bias Current (mA)
Status
High Alarm
High Warning
Low Alarm
Low Warning
: Disabled
: 25
:
RX Power
TX Power
(dBm)
(dBm)
---------- ----------- ---------- -------- ------------
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
Set [R]x Power Limit
Set [T]x Power Limit
Set [V]oltage Limit
Figure 4-59: Digital Diagnostic Monitoring
Displays the configuration to enable or disable to outgo SNMP traps
during the status change.
Displays the port where the SFP is plugged.
Displays the SFP type.
Displays the name of an SFP maker.
Displays the SFP part number.
Displays the SFP serial number.
Displays the received optical power of the SFP.
Displays the transmitted optical power of the SFP.
Displays an SFP temperature.
Displays the operating voltage of the SFP.
Displays the operating current of the SFP.
Displays the SFP status.
Displays the upper threshold of the alarm.
Displays the upper threshold of warning.
Displays the lower threshold of alarm(s).
Displays the lower threshold of warning.
Transceiver Type
Vender Product Number :
Temp
Voltage
(deg.C)
(V)
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
Set T[e]mp Limit
Set [B]ias Current Limit
[Q]uit to previous menu
173
:
Bias Current
(mA)
0.000
0.000
0.000
0.000
0.000
Advertisement
Table of Contents
