Panasonic PN261693D Manual page 52

-------------------------------------------------------------------------------------------------------------------------------------------
Note: When receiving frames with a new source MAC address that does not learn on
the condition that the MAC address of a limit value is learned already. To use the limit
value, the auto learning for MAC address needs to be enabled. A static MAC address is
not included in the target of the limit value.
-------------------------------------------------------------------------------------------------------------------------------------------
The following describes how to use several commands on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
S Switches the learning mode of a MAC address.
1. Press S (command), and then the appearance of the command prompt becomes "Select
port-number to be changed>". Enter the port-number to change the configuration.
2. As the appearance of the command prompt becomes "Change MAC Learning Mode for
port # (the port-number designated)>", press A when making it to learn a MAC address
automatically, and D to make it NOT to learn.
Q Returns to the top menu.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: Using with the configuration (concurrently), which makes a port not to learn on
the MAC Learning Menu, is not allowed when you use a function of IEEE802.1X
port-based authentication and MAC based authentication.
-------------------------------------------------------------------------------------------------------------------------------------------
52