Rrp Domain Modification Menu - Panasonic PN261693D Manual

4.10.3. RRP Domain Modification Menu

Press M (command) on the screen of the Ring Redundant Protocol Configuration,
and then you can see RRP Domain Modification Menu as Figure 4-49. You can
modify a RRP domain on this screen.
PNxxxxxx Local Management System
RRP Management -> RRP Domain Modification Menu
RRP Domain Name : RRP1
Primary Port
Secondary Port
Polling Interval : 1
Control VLAN
Data VLAN
-------------------------------- <COMMAND> -----------------------------------
Set RRP Domain [N]ame
Set [P]rimary Port
Set P[o]lling Interval
Set [C]ontrol VLAN
[A]pply
Command>
Enter the character in square brackets to select option
Screen Description
RRP Domain Displays a domain name.
Name
RRP Node Type Displays a node role.
Master
Transit
Primary Port Displays a primary port.
Secondary Port Displays a secondary port.
Polling Interval Displays the polling interval.
Fail Period Displays the time-out time for the polling.
Control VLAN Displays a VLAN ID to control it.
Data VLAN Displays a VLAN ID for data.
: 28
: 27
: 2
: 1
Figure 4-49: RRP Domain Modification Menu
Indicates a switch to control a ring operation. Set one machine
only in the domain for a master node.
Indicates a switch other than a master node.
RRP Node Type : Transit
Fail Period : 2
Set Node [T]ype
Set [S]econdary Port
Set [F]ail Period
Set [D]ata VLAN
[Q]uit to previous menu
153