Rrp Domain Information - Panasonic PN261693D Manual

4.10.4. RRP Domain Information

Press H (command) on the screen of the Ring Redundant Protocol Configuration,
and then you can see RRP Domain Information Menu as Figure 4-50. You can check
the RRP domain information on this screen.
PNxxxxxx Local Management System
RRP Management -> RRP Domain information Menu
RRP Domain Name
RRP Node Type
RRP Ring Status
Primary Port
Primary Port Status : Down
Primary Port Role
Secondary Port
Secondary Port Status: Down
Secondary Port Role : Downstream
Polling Interval
Fail Period
Control VLAN
Data VLAN
Press any key to continue...
Screen Description
RRP Domain Displays a domain name.
Name
Node Type Displays a node role.
Master
Transit
Ring Status Displays a ring condition.
IDLE
Complete
Failed
Link-Up
Link-Down
Pre-Forwarding
Primary Port Displays a primary port.
: RRP1
: Transit
: Idle
: 28
: Upstream
: 27
: 1
: 2
: 2
: 1
Figure 4-50: RRP Domain Information
Indicates a switch to control a ring operation. Configures only
one master node in the domain.
Indicates a switch other than the master node.
Indicates that the function of a ring protocol is disabled.
Indicates that a ring topology is accurately configured. This
status is displayed for the master node, only.
Indicates that a ring topology is not configured. This status is
displayed for the master node, only.
Indicates that a ring topology is accurately configured. This
status is displayed for transit node, only.
Indicates that a ring topology is not configured. This status is
displayed for a transit node, only.
Indicates that a ring topology is (in the progress of) being
configured. This status is displayed for a transit node, only.
155