Panasonic PN261693D Manual page 22

The following describes how to use several commands on this screen.
I Configures and changes an IP address.
Press I (command), and then the appearance of the command prompt becomes "Enter IP
address>". After that, enter the IP address of the switch.
M Configures and changes the subnet-mask.
Press M, and then the appearance of the command prompt becomes "Enter subnet mask>".
After that, enter the subnet-mask.
G Configures and changes an IP address of a router as a default gateway.
Press G, and then the appearance of the command prompt becomes "Enter new gateway IP
address>". After that, enter the IP address of a router as a default gateway.
A Configures an IP address, the subnet mask, and the default gateway, collectively.
1. Press A, and then the appearance of the command prompt becomes "Enter IP
address>"
2. As the appearance of the command prompt becomes "Enter subnet mask>", enter the
subnet mask.
3. As the appearance of the command prompt becomes "Enter new gateway IP address>,
enter the IP address of a router as a default gateway.
D 4. Configures to enable or disable the auto acquisition mode of the IP address from the DHCP
server.
E Enables the automatic acquisition. (This is operating if the DHCP server is in operation on
the network.)
D Disables the automatic acquisition.
Q Returns to the top menu.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: If this item is not configured, the remote connection cannot be used through
Telnet, SSH, and Web. Be sure to configure it. If you do not know how to configure,
contact the network administrator. Duplicating with the IP address of other device on
the network is not allowed. In addition, configure the default gateway and the subnet
mask, which are the same with other devices on the subnet using your device for this
item. This is used to identify the unique device on the network by combining the IP
address.
-------------------------------------------------------------------------------------------------------------------------------------------
.
After that, enter the IP address of the switch.
22