Igmp Snooping Vlan - Panasonic PN261693D Manual

4.7.1.

IGMP Snooping VLAN

Press S (command) on the screen of IGMP Snooping Configuration, and then you
can see "IGMP Snooping VLAN" as Figure 4-33.
PNxxxxxx Local Management System
IGMP Snooping Configuration -> IGMP Snooping VLAN
VID
Fast Leave
Querier Status
Query Version
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Proxy Reporting
Rate Limit
Unknown Data Learning
Unknown Data Expiry Time
-------------------------------- <COMMAND> -----------------------------------
[C]hoose VID
Set Querier [S]tatus Set [R]obustness Value Set Unknown [D]ata Expiry Time
Set Query [V]ersion
Set Query [I]nterval Set Rate [L]imit
Set [F]ast Leave
Command>
Enter the character in square brackets to select option
Screen Description
VID
Fast Leave
Querier Status
Query Version
Query Interval
Max Response Time
Robustness Value
Last Member Query
Interval
Proxy Reporting
Rate Limit
Unknown Data Learning
Unknown Data Expiry
Time
: 1
: Disabled (host-based)
: Disabled
: Version 3
: 125
: 10
: 2
: 1
: Disabled Source Address (0.0.0.0)
: 0
: Enabled
: Infinity
Set [M]ax Response Time Set [U]nknown Data Learning
Set [P]roxy Reporting
Figure 4-33: IGMP Snooping VLAN
Displays a VLAN ID.
Displays if Fast Leave is enabled or disabled.
Displays if IGMP snooping querier is enabled or disabled.
Displays the version of IGMP query to be transmitted.
Displays the interval for transmitting query. The factory default settings
is 125 seconds.
Displays the waiting time of response to query. The factory default
settings is 10 seconds.
Displays the robustness variable to use on IGMP snooping. The factory
default settings is 2.
Displays the transmission interval of query messages for transmitting
when receiving the withdrawal request. The factory default settings
is 1 second.
Displays the source IP of the proxy reporting. The factory default
settings is disabled.
Displays the upper value per 1 second of the IGMP control packet for
receiving. The factory default settings is disabled.
Displays the learning status (or condition) of a group information when
receiving the multi-cast data packets without listeners.
Displays the expiration date of unknown data group learned from IGMP
snooping.
120
Set L[A]st Member Query Interval
[Q]uit to previous menu