Table of Contents
Advertisement
The following describes how to use several commands on this screen.
C
Configures the time of the built-in clock of your device.
1. Press C (command), and then the appearance of the command prompt becomes "Enter
Date(Year) >". Enter the year for that.
2. The appearance of the command prompt becomes "Enter Date(Month) >". Then enter
month for that.
3. The appearance of the command prompt becomes "Enter Date(Day) >". Then enter
the date.
4. The appearance of the command prompt becomes "Enter Time(Hour) >". Then enter
the time for that.
5. The appearance of the command prompt becomes "Enter Time(Minute) >". Then
enter minutes for that.
6. The appearance of the command prompt becomes "Enter Time(Sec) >". Then enter
seconds for that.
P
Configures an IP address of an SNTP server.
Press P (command ), and then the appearance of the command prompt becomes "Enter
new IP address>". After that, enter the IP address of the SNTP server.
Z
Configures a timezone.
Press Z (command), and then a list of timezone is displayed. Specify a corresponding time-
zone.
If
"(GMT+09:00)Osaka,Sapporo,Tokyo" of the factory default settings is not needed.
S
Configures the IPv6 address of the SNTP server.
Press S (command), and then the appearance of the command prompt becomes "Enter new
server IPv6 address>". After that, enter the IPv6 address of the SNTP server.
Q
Returns to the top menu.
-------------------------------------------------------------------------------------------------------------------------------------------
Note: If an SNTP server is outside of a firewall, connecting to the SNTP server is
impossible, depending on the configuration done by a system administrator. Ask him
or her for details. In addition, if a function of the time synchronization needs to be dis-
abled, set the current time source to either "0.0.0.0" or "::".
-------------------------------------------------------------------------------------------------------------------------------------------
it
is
used
in
the
domestic
area
58
normally,
changing
from
Advertisement
Table of Contents
