6.3. System Reboot
Press R on the Switch Tools Configuration menu to see System Reboot Menu, as
Figure 6-5 below. This screen allows you to restart this device.
PNxxxxxx Local Management System
Switch Tools Configuration -> System Reboot Menu
Reboot Type: Normal
-------------------------------- <COMMAND> -----------------------------------
Set Reboot [O]ption
Start [R]eboot Process
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Reboot Type
The following describes how to use several commands on this screen.
O
Set the reboot method to a mere reboot, or return the method to the factory default settings.
Press O (command), and then the appearance of the command prompt becomes "Select
reboot option (N/F)>". Press N to reboot normally, and F to return all to the factory default
settings.
R
Execute the reboot (process).
Press R, and then the appearance of the command prompt becomes "Are you sure to
reboot the system (Y/N)". Press Y to execute, and N to stop that.
Q
Returns to the top menu.
Figure 6-5: System Reboot
Displays the reboot method. The factory default settings is Normal.
Normal
Executes the normal reboot.
Factory Default
All of the configurations return to the factory default
settings.
184