Table of Contents
Advertisement
The following describes how to use several commands on this screen.
X
Configures to enable or disable the exception handling function.
Press X (command), and then the appearance of the command prompt becomes "Enable or
Disable Exception Handler (E/D)>". After that, press E to enable the function and D
otherwise.
M Configures the method of the exception handling.
Press M, and then the appearance of the command prompt becomes "Select Exception
Handler Mode (M/R/B)>". After that, press M to display a debug message, R to reboot, and
B to implement both of them.
Q
Returns to the top menu.
186
Advertisement
Table of Contents
