Table of Contents
Advertisement
The following describes how to use several commands on this screen.
N
Displays the next page.
Press N (command) to display the next page.
P
Displays the previous page.
Press P to display the previous page.
T
Specify (or designate) the entry holding-time of PPS Neighbor as the second unit.
Press T, and then the appearance of the command prompt becomes "Enter neighbor age-out time>".
Enter the number of seconds, to keep (or store) the PPS Neighbor entry, in the range from 60 to
86,400.
D
Deletes the entry of the PPS Neighbor registered.
Press D, and then the appearance of the command prompt becomes "Enter MAC
Address(xx:xx:xx:xx:xx:xx)>". Enter a MAC address of the PPS Neighbor entry to be deleted.
S
Displays the details on the PPS Neighbor entry.
Press S, and then the appearance of the command prompt becomes "Enter MAC
Address(xx:xx:xx:xx:xx:xx)>". Enter a MAC address of the PPS Neighbor entry to display information.
See Figure 4-56 for details.
Q
Returns to the top menu.
169
Advertisement
Table of Contents
