Designated Topology Information (1-3-5-C) - Panasonic PN261693D Manual

4.4.9.

Designated Topology Information (1-3-5-c)

Press I (command) on the Multiple Spanning Tree Configuration menu, and then
you can see "Designated Topology Information" as Figure 4-24. This screen dis-
plays the configuration information on a spanning tree per port.
PNxxxxxx Local Management System
Multiple Spanning Tree Configuration -> Designated Topology Information
Port Trunk Link
---- ----- ---- ----------------- ----------- ----------------- -----------
1 ---
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
8 ---
9 ---
10 ---
11 ---
12 ---
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
Command>
Enter the character in square brackets to select option
Figure 4-24: Designated Topology Information (1-3-5-c)
Screen Description
Port
Trunk
Link
Cist Desig.Root
Cist Desig.Cost
Cist Desig.Bridge
Cist Desig.Port
The following describes how to use several commands on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
Q Returns to the top menu.
Cist
Desig. Root
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
Down 8000 xxxxxxxxxxxx
[P]revious Page
Displays the port-number.
If trunking is configured, the group number of trunking (key) is displayed.
Displays the link condition.
UP Indicates the condition that a link is normally estab-
lished.
DOWN Indicates the condition that a link is not established.
Displays an ID of a root bridge.
Displays the cost, which is in the progress of being transmitted.
Displays the bridge ID of a bridge specified.
Displays a port ID of the port specified. (The port ID is the combination of
the value of a port priority and the port-number.)
Cist Cist
Desig. Cost Desig. Bridge
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
0 8000 xxxxxxxxxxxx
[Q]uit to previous menu
107
Cist
Desig. Port
00 01
00 02
00 03
00 04
00 05
00 06
00 07
00 08
00 09
00 0A
00 0B
00 0C