Panasonic PN261693D Manual page 127

The following describes how to use several commands on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
S Configures the method of processing multi-cast packets of the interface.
Press S (command), and then the appearance of the command prompt becomes "Enter
VLAN ID > Enter the VLAN ID to configure. After that, the appearance of the command
prompt becomes "Choose mode(F/A/U) >". Press F to set to "Forward Unregistered", A
to set to "Forward All", and U to set to "Filter Unregistered".
Q Returns to the top menu.
127